Herringbone engineered wood flooring gives you the classic parquet pattern in real oak, built on a stable layered core that suits modern homes. Engineered herringbone blocks have a genuine oak top layer, so they look, feel and age like a traditional block floor, while the core keeps each block steady over underfloor heating, on concrete and through the seasons.
Engineered oak herringbone comes as click blocks that lock together over an underlay, quicker to fit and suitable for a careful DIYer, or glue-down blocks bonded to the subfloor for the most solid, traditional result. Choose natural, smoked, grey or white-washed oak, in prime grade for a calm pattern or rustic for character, and lacquered or oiled finishes.
See oak herringbone flooring in solid and engineered oak, compare with oak chevron, or browse herringbone flooring in every material. Our article on herringbone engineered wood flooring and our parquet guide explain more.
Not sure which floor is right? Order free samples and see them in your own light, or call our team on 020 3287 6206 for honest, no-pressure advice.
Colour
Finish
Price per m²
- £20 – £29.99 (1)
Floor Style
- Herringbone (1)
- Herringbone / Parquet (1)
Thickness
- 10 1
Species
- Oak (1)
Grade
- Rustic (1)
Wear Layer
- 3 (1)
Width
- Up to 100mm (1)
Length
Joining Method
- Tongue & Groove (1)
Room Suitability
- Bedroom (1)
- Conservatory (1)
- Dining Room (1)
- Hallway (1)
- Kitchen (1)
- Living Room (1)
- Study / Office (1)
Nihon Golden Horizon Lacquered Rustic Engineered Oak Herringbone Flooring 10/3 x 80mm
Filters By
Nihon Golden Horizon Lacquered Rustic Engineered Oak Herringbone Flooring 10/3 x 80mm
Why engineered herringbone?
Solid oak blocks move with heat and humidity, which can open gaps in a herringbone floor and makes them a poor match for underfloor heating. Engineered blocks have a cross-laid core that resists that movement, so the pattern stays tight and flat in modern, centrally heated homes, over underfloor heating and on concrete screeds. You still walk on real oak, which can usually be sanded if the oak layer is 3mm or more.
How to choose engineered herringbone
Click or glue-down?
Click herringbone locks together and floats over an underlay; it is quicker, cleaner and can be lifted later. Glue-down herringbone is bonded with a wood floor adhesive; it feels the most solid, transfers heat best from underfloor heating and suits borders and complex layouts.
Block size
Short, narrow blocks give a tight, traditional pattern for hallways and period homes; longer, wider blocks make a bold, modern pattern in large rooms.
Oak layer and thickness
A thicker oak top layer allows more sanding over the floor’s life; around 14mm to 15mm overall suits most homes and underfloor heating.
Colour, grade and finish
Natural oak keeps the pattern bright; smoked and dark oak give depth; grey and white-washed oak suit modern schemes. Prime grade makes the pattern the star; rustic grade adds knots and character. Lacquer is the easiest to clean; oil looks natural and can be touched up.
Planning the pattern
- Direction: along the longest wall or the main line of sight.
- A and B blocks: equal numbers of left- and right-hand blocks, unless packed as a mixed set.
- Centre line: set out from the middle so the pattern ends evenly at both walls.
- Border: a frame of straight blocks for a formal finish.
- Wastage: about 10% extra; see our measuring guide.
Fitting engineered herringbone
Let the packs acclimatise for 24 to 72 hours. Check the subfloor is dry, flat and level; herringbone shows unevenness more than planks. Glued herringbone is best laid by an experienced fitter, and we can put you in touch with trusted installers. Leave an expansion gap and cover it with oak skirting or oak beading. Our article on installing herringbone at home and our installation guides explain the steps.
Underfloor heating
Engineered herringbone is ideal over underfloor heating: glue it down for the best heat transfer, keep the floor surface below 27°C and raise the heating slowly.
Looking after it
Vacuum with a soft brush head, clean with a well-wrung mop and a pH-neutral wood floor cleaner, use felt pads and door mats, and give oiled floors an occasional coat of maintenance oil.
Comparing samples at home
Order free samples of two or three options and put them on the floor of the room where they will be laid. Look at them in daylight and in the evening under your own lamps, next to the walls, skirting, units and furniture they will sit with. Colours and textures look different in every room and on every screen, so a few minutes with real samples is the best way to avoid a costly mistake. Stand back as well as looking close up: a floor is mostly seen from standing height and from the doorway.
FAQs on Herringbone Engineered Wood Flooring
Yes. Each block has a real oak top layer on a stable core, so it looks and ages like a traditional oak block floor.
For underfloor heating, concrete and modern centrally heated homes, yes: it moves less. Solid blocks can be sanded more times.
A careful DIYer can, if the centre line is set out accurately. Glue-down herringbone is best left to an experienced fitter.
Yes. Glue it down for the best heat transfer and keep the floor surface below 27°C.
About 10% for cutting waste, more in small or awkward rooms, because every block at the wall is cut at an angle.
Usually, if the oak layer is 3mm or more; a thicker oak layer allows more sanding over the floor’s life.
Newsletter Subscribe
It only takes a second to be the first to find out about our latest news and promotions...