18mm engineered wood flooring is the thick, premium end of engineered oak: a board that feels as solid underfoot as a traditional solid wood floor, usually with a deep oak top layer of 4mm to 6mm that can be sanded several times over the floor’s life. It gives you the substance and longevity of solid oak with the stability of an engineered core, which makes it suitable for more rooms and subfloors than solid wood.
Because of their thickness and stiffness, some 18mm boards can be fixed directly to joists, like solid wood, which suits period homes where the old floorboards are being replaced; others need a continuous subfloor. Check the product page. 18mm boards come in every oak look, including wide planks, rustic and prime grades, and thick wear layers such as 6mm wear layer boards.
Compare thicknesses: 14mm and 15mm heat up faster and raise the floor less; 20mm is thicker still. Or compare 18mm solid wood. Our engineered wood guide explains construction.
Not sure which floor is right? Order free samples and see them in your own light, or call our team on 020 3287 6206 for honest, no-pressure advice.
Colour
- DarkDark 10
- GreyGrey 4
- LightLight 15
- MediumMedium 19
- Natural 11
- White 1
Finish
Price per m²
- £20 – £29.99 (2)
- £30 – £39.99 (11)
- £40 – £49.99 (1)
- £50 – £59.99 (2)
- £60 – £69.99 (5)
- £70 and over (9)
Floor Style
- 1 Strip (Single Plank) (3)
- Chevron (5)
- Herringbone (22)
- Herringbone / Parquet (27)
Thickness
- 18 30
Width
- Up to 100mm (20)
- 101–139mm (8)
- 140–179mm (2)
Length
Joining Method
- Tongue & Groove (30)
Room Suitability
- Bedroom (30)
- Conservatory (30)
- Dining Room (30)
- Hallway (30)
- Kitchen (30)
- Living Room (30)
- Study / Office (30)
Nihon Faux Walnut Brushed & Matt Lacquered Rustic Engineered Oak Herringbone Flooring 18/3 x 80mm
Nihon Golden Hand Scraped Lacquered Rustic Engineered Oak Flooring 18 x 125mm
Nihon Graphite Grey Brushed & Matt Lacquered Rustic Engineered Oak Herringbone Flooring 18/3 x 80mm
Nihon Gunmetal Grey Brushed & Matt Lacquered Rustic Engineered Oak Herringbone Flooring 18/3 x 80mm
Nihon Natural Brushed & Matt Lacquered Rustic Engineered Oak Herringbone Flooring 18/3 x 125mm
Nihon Natural Brushed & Matt Lacquered Rustic Engineered Oak Herringbone Flooring 18/3 x 80mm
Nihon Natural Brushed & Oiled Rustic Engineered Oak Flooring 18 x 125mm
Nihon Natural Brushed Unfinished Prime Engineered Oak Herringbone Flooring 18/3 x 90mm
Nihon Natural Lacquered Rustic Engineered Oak Flooring 18 x 125mm
Nihon Natural Unfinished Rustic Engineered Oak Herringbone Flooring 18/4 x 90mm, 400mm long
Nihon Natural Unfinished Rustic Engineered Oak Herringbone Flooring 18/4 x 90mm, 600mm long
Nihon Smoked Brushed & Oiled Rustic Engineered Oak Herringbone Flooring 18/4 x 90mm, 600mm long
Filters By
Nihon Faux Walnut Brushed & Matt Lacquered Rustic Engineered Oak Herringbone Flooring 18/3 x 80mm
Nihon Golden Hand Scraped Lacquered Rustic Engineered Oak Flooring 18 x 125mm
Nihon Graphite Grey Brushed & Matt Lacquered Rustic Engineered Oak Herringbone Flooring 18/3 x 80mm
Nihon Gunmetal Grey Brushed & Matt Lacquered Rustic Engineered Oak Herringbone Flooring 18/3 x 80mm
Nihon Natural Brushed & Matt Lacquered Rustic Engineered Oak Herringbone Flooring 18/3 x 125mm
Nihon Natural Brushed & Matt Lacquered Rustic Engineered Oak Herringbone Flooring 18/3 x 80mm
Nihon Natural Brushed & Oiled Rustic Engineered Oak Flooring 18 x 125mm
Nihon Natural Brushed Unfinished Prime Engineered Oak Herringbone Flooring 18/3 x 90mm
Nihon Natural Lacquered Rustic Engineered Oak Flooring 18 x 125mm
Nihon Natural Unfinished Rustic Engineered Oak Herringbone Flooring 18/4 x 90mm, 400mm long
Nihon Natural Unfinished Rustic Engineered Oak Herringbone Flooring 18/4 x 90mm, 600mm long
Nihon Smoked Brushed & Oiled Rustic Engineered Oak Herringbone Flooring 18/4 x 90mm, 600mm long
What 18mm engineered wood is made of
An 18mm board is a real oak top layer, typically 4mm to 6mm, bonded to a thick, stable core of birch plywood or multi-layer softwood. The core’s layers run at right angles, so the board resists the expansion and shrinkage that solid wood suffers. The thick top layer means the floor can usually be sanded and refinished several times: a 6mm layer gives a lifetime close to that of a solid floor.
Why choose 18mm?
- Solid feel: the stiffest engineered boards, with a weighty, quiet feel underfoot.
- Long life: thick wear layers allow several sandings over many decades.
- Joist fixing: some 18mm boards can be secret-nailed straight to joists; check the product.
- Height matching: lines up with existing 18mm to 22mm floorboards and solid floors in period homes.
- Wide boards: thickness keeps wide planks flat and stable.
18mm and underfloor heating
Many 18mm boards are approved for underfloor heating, but a thicker board takes longer to warm up and passes heat through more slowly than a 14mm board. If heating is your priority, compare the product’s thermal information, or choose a thinner board. Keep the floor surface within the maker’s limit, usually 27°C.
Fitting methods
- Secret-nailed to joists or a timber subfloor: traditional and solid; only for boards approved for joist fixing, at the stated joist spacing.
- Glued to concrete or plywood: with a wood floor adhesive; the most solid result, often preferred over underfloor heating.
- Floated: click or tongue-and-groove boards over an engineered wood flooring underlay, where the maker allows.
Floor height
An 18mm floor is thick. Check doors, thresholds, kitchen plinths and the top stair before you buy, especially if replacing a thin floor. When replacing old floorboards in a period home, 18mm often lines up well with the rooms around it.
18mm engineered or 18mm solid?
Both feel solid and last a long time. Engineered is more stable, suits concrete and underfloor heating and allows wider boards; solid can be sanded slightly more often over its life and is the traditional choice over joists. For most modern homes, 18mm engineered is the safer all-rounder.
Where 18mm engineered wood works best
Period homes: replacing old floorboards over joists. Large living spaces: wide, long boards that stay flat. Busy homes: a thick wear layer that can be renewed many times. Never bathrooms: wood is not suitable there.
Fitting tips
Acclimatise the boards in the room, check the subfloor’s moisture, and leave an expansion gap at the walls. Thick boards are heavy: cut them with a good saw and allow time. Finish with oak skirting or oak beading. Most people use an experienced fitter for nailed or glued floors. Our installation guides explain each method.
Comparing samples at home
Order free samples of two or three options and put them on the floor of the room where they will be laid. Look at them in daylight and in the evening under your own lamps, next to the walls, skirting, units and furniture they will sit with. Colours and textures look different in every room and on every screen, so a few minutes with real samples is the best way to avoid a costly mistake. Stand back as well as looking close up: a floor is mostly seen from standing height and from the doorway.
Common mistakes
- Nailing to joists a board that is not approved for joist fixing.
- Forgetting the extra floor height at doors and stairs.
- Expecting a thick board to heat up as fast as a 14mm one.
FAQs on 18mm Engineered Wood Flooring
Usually 4mm to 6mm, which allows several sandings. Check each product page.
Some boards can be secret-nailed straight to joists. Check the product is approved and follow the joist spacing.
Many boards are approved, but thicker boards warm up more slowly than 14mm or 15mm boards.
Engineered is more stable and suits concrete and heating; solid is the traditional choice over joists.
With a thick wear layer and regular care, many decades: it can be sanded and refinished several times.
Yes, the boards are heavy and stiff. Most people use an experienced fitter for nailed or glued floors.
Newsletter Subscribe
It only takes a second to be the first to find out about our latest news and promotions...