14mm Engineered Wood Flooring

14mm engineered wood flooring is one of the most popular board thicknesses for UK homes: a real oak top layer on a stable core, thick enough to feel solid and quiet underfoot, yet slim enough to keep the floor height manageable next to other rooms and under doors. 14mm engineered oak flooring is especially well suited to underfloor heating, because a thinner board lets heat through more quickly than thicker boards.

Most 14mm boards have a 3mm to 4mm oak top layer, which can typically be sanded a couple of times over the life of the floor. They come in every look: natural, light, smoked and grey oak, rustic and prime grades, oiled and lacquered finishes, and patterns such as herringbone engineered wood. Many are click engineered wood, a realistic DIY project.

Compare 14mm wood flooring with 15mm and 18mm engineered wood, or thinner 10mm boards. Heating your floor? See engineered wood for underfloor heating. Our engineered wood guide explains construction.

Not sure which floor is right? Order free samples and see them in your own light, or call our team on 020 3287 6206 for honest, no-pressure advice.

Showing 1–12 of 114 results

What 14mm means

14mm is the total thickness of the board: a real hardwood top layer (the wear layer) bonded to a core of plywood, softwood or HDF. A common build is a 3mm oak layer on an 11mm core, or 4mm on 10mm. Check the product page: the wear layer, not the total thickness, decides how many times the floor can be sanded.

Why choose a 14mm board?

  • Solid feel: stiff enough to feel like a real wood floor, especially over a good underlay or glued down.
  • Underfloor heating: a slimmer board passes heat through faster than 18mm or 20mm boards, so rooms warm up more quickly.
  • Manageable height: with a thin underlay, a 14mm floor often lines up with the next room or needs only a small threshold.
  • Refinishable: a 3mm to 4mm oak layer can usually be sanded a couple of times.
  • Value: uses less oak than thicker boards, for a real wood floor at a sensible cost.

14mm compared with other thicknesses

10mm to 12mm: the lowest real wood floors, good for limited height and quick heat-up; usually a thinner oak layer. 14mm to 15mm: the all-round choice for most homes. 18mm to 20mm: the most solid feel, thicker oak layers that can be sanded more often, and the closest to a solid wood floor; they can be fixed to joists in some cases.

Click or tongue and groove?

Click: boards lock together and float over an underlay, quick and DIY-friendly. Tongue and groove: traditionally glued, or floated with glue in the joints; gluing down to the subfloor gives the most solid feel and is often recommended over underfloor heating. See tongue and groove engineered wood.

Where 14mm engineered wood works

  • Living rooms, dining rooms and bedrooms: the classic choice for real wood.
  • Rooms with underfloor heating: choose a board approved for heating.
  • Kitchens: with a durable lacquer or hardwax oil, and spills wiped promptly.
  • Concrete floors: floated over an underlay with a damp proof membrane, or glued.
  • Never bathrooms: wood is not suitable for bathrooms; use waterproof vinyl.

Floor height

Board plus underlay is usually about 16mm to 17mm. Check doors, thresholds, kitchen plinths and the top stair. A glued-down floor adds only the board plus a thin layer of adhesive.

Fitting 14mm engineered wood

Let the packs acclimatise in the room, check concrete with a moisture meter and either float the boards over an engineered wood flooring underlay or glue them with a wood floor adhesive. Mix boards from several packs, stagger the end joints and leave an expansion gap. Finish with oak beading or skirting. Our installation guides explain each method, and our measuring guide helps with quantities.

Comparing samples at home

Order free samples of two or three options and put them on the floor of the room where they will be laid. Look at them in daylight and in the evening under your own lamps, next to the walls, skirting, units and furniture they will sit with. Colours and textures look different in every room and on every screen, so a few minutes with real samples is the best way to avoid a costly mistake. Stand back as well as looking close up: a floor is mostly seen from standing height and from the doorway.

Common mistakes

  • Comparing boards by total thickness instead of the oak layer.
  • Choosing a board for underfloor heating without checking it is approved.
  • Forgetting to allow for underlay in the floor height.

FAQs on 14mm Engineered Wood Flooring

Yes, for most homes. It feels solid underfoot, and a 3mm to 4mm oak layer allows a couple of sandings.

Yes. A slimmer board passes heat through faster than thicker boards; choose one approved for heating.

Usually around 3mm to 4mm, but check each product: the wear layer decides how often it can be sanded.

14mm heats up faster and raises the floor less; 18mm feels more solid and usually has a thicker oak layer.

Usually not: most 14mm boards need a continuous subfloor such as plywood or chipboard. Check the product.

Click versions are a realistic DIY project over an underlay; glue-down boards are best left to a fitter.

Newsletter Subscribe

It only takes a second to be the first to find out
about our latest news and promotions...